SCAFFOLDING TUBES

The product detail given below is for your initial information. Catalogues and samples shall be submitted to you upon request to review the quality of our products.

We assure you of the quality & timely delivery and look forward to receiving your requirements.

GALVANIZED SCAFFOLDING STEEL TUBES
1	These Tubes are made from Tested Steel as per IS 1161 equivalent to BS: 1139 Part-1.  OD 48.3mm x 3.0mm wall thickness x 5.85mtrs length, medium duty type tubes are fully HOT DIPPED GALVANIZED with a minimum coating of 80 microns. TESTS: Bend Test, Flattening Test & Yield Stress Test 240Mpa. (Certificates to be upon request).

 

1.      COUPLER SCAFFOLDING & ACCESSORIES

·         Swivel Coupler, Drop Forged

·         Fixed Coupler, Drop Forged

·         Half Coupler, Drop Forged

·         Swivel Coupler, Pressed

·         Fixed Coupler, Pressed

·         Single Coupler Drop Forged & Pressed Steel

·         Sleeve Coupler, Pressed

·         Forged Coupler, 14mm bolts

 

2.      PROP SET (COMPLETE): Sizes from 1.05mtrs to 4.8mtrs lengths

·         Prop Sleeve

·         Prop Nuts: Light/Medium/Heavy/Extra Heavy

·         G-Pins

 

3.      ADJUSTABLE JACKS:

·         Adjustable Base Jack

·         Universal Jack

·         U-Head Jack

 

4.      FRAMES:

·         H-Frames

·         Cross Bracing

·         Joint Pin, Pressed Steel.

 

5.      FORMWORK ACCESSORIES:

·         Rapid Clamp, Casting

·         Tie Rod with Wing Nut

·         Water Barrier

·         Water Barrier with Groove

·         Base Plate

·         Wedge Clamp

·         Wing Nuts & Dywidag Nuts

 

6.      GALVANIZED SCAFFOLDING STEEL TUBES: These Tubes are made from Tested Steel as per IS 1161 equivalent to BS: 1139 Part-1.  OD 48.3mm x 3.0mm wall thickness x 5.85mtrs length, medium duty type tubes are fully HOT DIPPED GALVANIZED with a minimum coating of 80 microns.

TESTS: Bend Test, Flattening Test & Yield Stress Test 240Mpa. (Certificates to be upon request).